Reconnaissance teams of all different origins have always been centered around the ability to be a minimalist, highly maneuverable element that can discreetly observe and report on the enemy, providing valuable intelligence for command elements that often dictates when and where the fight takes place. With this mission comes the desire for lightweight and versatile equipment when applicable or available. This philosophy extends to many facets of reconnaissance but one that stands out the most is the rifle these individuals or teams select. There have been many stages in the evolution of the recce rifle over time and while I will touch on these variants briefly, my primary topic will be on the rifle as it is most commonly setup today.
The original Recce Rifle was developed through the Naval Surface Warfare Center’s Crane Division in an effort to provide SEAL snipers with a lightweight semi automatic weapon that possessed greater lethality than the M4 carbine but at the same time was far more versatile than the current precision rifle options at hand such as the M14 or even, later, the M110. What they came up with is commonly known as the Mk12 MOD 1 and MOD 0 SPR (special purpose rifle), essentially an accurized M16A4 and for its time and purpose served the operators who carried it well; for that matter it is still in use today. It can be argued that many other rifles such as the M14 EBR, M110, SR25 and AR10 are similar in nature, almost a big brother category; but they are not the same given their weight and caliber. The Recce Rifle today has changed quite a bit and given that there really aren’t any real specific guidelines to classify the rifle as such, it comes in many versions but generally speaking has some specific characteristics.
Ukrainian Recon team members participate in a sniper course.
Optics wise a variable power is the current preferred choice, usually a 1-6 power but recently the introduction of 1-8 powers has started a new trend as well. The rifle pictured is out fitted with a Vortex Strike Eagle 1-6×24, a low-cost, budget friendly optic but very much a viable option. Many of these optics are outfitted with BDC (bullet drop compensating) reticles that account for set distances, usually in 100 meter increments, and give the shooter a means to measure targets distance using size for reference. While first focal planes are a great here and are generally of a higher quality production, also higher cost, they are not necessary with the addition of an offset red dot optic. This allows the shooter to leave the second focal plane variable power optic on its maximum magnification and simply cant (tilt) the rifle to utilize the red dot for close quarters engagements. This same technique can be applied to FFP optics of course but they do not suffer from the same detriment as the SFPs.
Barrel profile is a subject of constant debate but what I can say is a Recce Rifle should ideally have a 16″-18″ barrel length for optimum performance; in my personal opinion, a 16″ barrel with a mid length gas system is perfect though. I choose an enhanced lightweight profile but a standard profile would be fine too; heavy barrels are overkill given the rifle is not designed to be used for extended periods of heavy sustained rates of fire and that its purpose is to be lightweight for long-range reconnaissance patrols and such. I believe the mid length gas system is an excellent choice because the rifle should be precise and stable especially for mid-range to long-distance shots; a carbine length gas system, while very reliable, produces more recoil than the mid.
A Ukrainian soldiers Recce style modified RPK-74.
A free floated rail system is also desirable to achieve the necessary level of accuracy expected of a Recce rifle, generally a key mod or m-lok based model would be desired as well for the simple fact of keeping the weight down as much as possible or reasonable. An adjustable stock is a good option as well for versatility when shooting depending on equipment, terrain, and position. I advocate flash hiders almost exclusively because of the smaller signature but compensators can give the shooter an edge in marksmanship so that’s a user preference option. Lastly a good sling, magazines and trigger are what you want; everything else like lights, lasers, night vision, and ammunition type are mission dependent so make your own decision there. No doubt will current shooting and combat trends continue to change with the times and technology but as long as it gets the job done then that’s all that matters in my mind.
https://youtu.be/90n_ud7gct0
Reconnaissance teams of all different origins have always been centered around the ability to be a minimalist, highly maneuverable element that can discreetly observe and report on the enemy, providing valuable intelligence for command elements that often dictates when and where the fight takes place. With this mission comes the desire for lightweight and versatile equipment when applicable or available. This philosophy extends to many facets of reconnaissance but one that stands out the most is the rifle these individuals or teams select. There have been many stages in the evolution of the recce rifle over time and while I will touch on these variants briefly, my primary topic will be on the rifle as it is most commonly setup today.
The original Recce Rifle was developed through the Naval Surface Warfare Center’s Crane Division in an effort to provide SEAL snipers with a lightweight semi automatic weapon that possessed greater lethality than the M4 carbine but at the same time was far more versatile than the current precision rifle options at hand such as the M14 or even, later, the M110. What they came up with is commonly known as the Mk12 MOD 1 and MOD 0 SPR (special purpose rifle), essentially an accurized M16A4 and for its time and purpose served the operators who carried it well; for that matter it is still in use today. It can be argued that many other rifles such as the M14 EBR, M110, SR25 and AR10 are similar in nature, almost a big brother category; but they are not the same given their weight and caliber. The Recce Rifle today has changed quite a bit and given that there really aren’t any real specific guidelines to classify the rifle as such, it comes in many versions but generally speaking has some specific characteristics.
Ukrainian Recon team members participate in a sniper course.
Optics wise a variable power is the current preferred choice, usually a 1-6 power but recently the introduction of 1-8 powers has started a new trend as well. The rifle pictured is out fitted with a Vortex Strike Eagle 1-6×24, a low-cost, budget friendly optic but very much a viable option. Many of these optics are outfitted with BDC (bullet drop compensating) reticles that account for set distances, usually in 100 meter increments, and give the shooter a means to measure targets distance using size for reference. While first focal planes are a great here and are generally of a higher quality production, also higher cost, they are not necessary with the addition of an offset red dot optic. This allows the shooter to leave the second focal plane variable power optic on its maximum magnification and simply cant (tilt) the rifle to utilize the red dot for close quarters engagements. This same technique can be applied to FFP optics of course but they do not suffer from the same detriment as the SFPs.
Barrel profile is a subject of constant debate but what I can say is a Recce Rifle should ideally have a 16″-18″ barrel length for optimum performance; in my personal opinion, a 16″ barrel with a mid length gas system is perfect though. I choose an enhanced lightweight profile but a standard profile would be fine too; heavy barrels are overkill given the rifle is not designed to be used for extended periods of heavy sustained rates of fire and that its purpose is to be lightweight for long-range reconnaissance patrols and such. I believe the mid length gas system is an excellent choice because the rifle should be precise and stable especially for mid-range to long-distance shots; a carbine length gas system, while very reliable, produces more recoil than the mid.
A Ukrainian soldiers Recce style modified RPK-74.
A free floated rail system is also desirable to achieve the necessary level of accuracy expected of a Recce rifle, generally a key mod or m-lok based model would be desired as well for the simple fact of keeping the weight down as much as possible or reasonable. An adjustable stock is a good option as well for versatility when shooting depending on equipment, terrain, and position. I advocate flash hiders almost exclusively because of the smaller signature but compensators can give the shooter an edge in marksmanship so that’s a user preference option. Lastly a good sling, magazines and trigger are what you want; everything else like lights, lasers, night vision, and ammunition type are mission dependent so make your own decision there. No doubt will current shooting and combat trends continue to change with the times and technology but as long as it gets the job done then that’s all that matters in my mind.
https://youtu.be/90n_ud7gct0
As someone who’s seen what happens when the truth is distorted, I know how unfair it feels when those who’ve sacrificed the most lose their voice. At SOFREP, our veteran journalists, who once fought for freedom, now fight to bring you unfiltered, real-world intel. But without your support, we risk losing this vital source of truth. By subscribing, you’re not just leveling the playing field—you’re standing with those who’ve already given so much, ensuring they continue to serve by delivering stories that matter. Every subscription means we can hire more veterans and keep their hard-earned knowledge in the fight. Don’t let their voices be silenced. Please consider subscribing now.
One team, one fight,
Brandon Webb former Navy SEAL, Bestselling Author and Editor-in-Chief
Barrett is the world leader in long-range, large-caliber, precision rifle design and manufacturing. Barrett products are used by civilians, sport shooters, law enforcement agencies, the United States military, and more than 75 State Department-approved countries around the world.
PO Box 1077 MURFREESBORO, Tennessee 37133 United States
Scrubba Wash Bag
Our ultra-portable washing machine makes your journey easier. This convenient, pocket-sized travel companion allows you to travel lighter while helping you save money, time and water.
Our roots in shooting sports started off back in 1996 with our founder and CEO, Josh Ungier. His love of airguns took hold of our company from day one and we became the first e-commerce retailer dedicated to airguns, optics, ammo, and accessories. Over the next 25 years, customers turned to us for our unmatched product selection, great advice, education, and continued support of the sport and airgun industry.
COMMENTS
There are on this article.
You must become a subscriber or login to view or post comments on this article.